Brakes & wheel end
Brakes, ABS wheel-speed parts, hubs, bearings, studs, and lug hardware. Choose your vehicle family below, then check the guide's part numbers and application notes. Parts from different vehicle families are not necessarily interchangeable.
36 verified buyer guides
2013-2014 BRZ 6MT VDC Hydraulic Unit and ABS Module Identification
US/LHD 2013-2014 Subaru BRZ Base and Limited/High with factory standard brakes and 6-speed manual transmission only. Resolve both VINs/builds, 6MT equipment, exact installed/service identity, connector, hydraulic-line ports, calibration state and written contents. Exclude 6AT branches, Scion FR-S/Toyota 86 cross-badge assumptions, 2015-2020 BRZ, factory-Brembo or converted systems, 2022-and-later second generation, non-US/RHD assumptions, unidentified universal units, mixed hydraulic/electronic halves, flood/fire/collision-contaminated donors and ABS/VSC delete or bypass work.
View guide350Z ABS Wheel-Speed Sensors and Harness Diagnosis
2003-2008 Nissan 350Z; front sensors are side-specific, rear sensor 47900-AL505 covers the checked left/right rear application. Confirm ABS/VDC configuration and VIN.
View guide350Z Brake Master Cylinder and Booster Fitment
2003-2008 Nissan 350Z; master-cylinder and booster selection depends on brake package, trim, body and production details.
View guide350Z Brake Pads and Rotors: Base Calipers vs Factory Brembo
US-spec 2003-2008 Nissan 350Z Coupe and 2004-2008 Roadster; match the brakes physically installed.
View guide350Z Front Akebono Brake Conversion
Z33 350Z 2003-08 (front axle only; Z34 370Z / G37 Sport Akebono donor family)
View guide350Z & V35 G35 RWD Front Hub/Bearing Assembly
Z33 350Z 2003-2008; V35 G35 coupe 2003-2007; V35 G35 sedan 2003-2006 RWD/2WD only
View guide350Z Rear Wheel Bearings and Hubs: Press-In Bearing vs Preassembled Kit
US-spec 2003-2008 Nissan 350Z only; rear driven-wheel hub and press-in bearing. G35/V35 and AWD are excluded.
View guideE36/E46 Rear Wheel Bearings, Hubs & Axle-Nut Service Parts
Common non-M E36/E46 rear applications listed for bearing kit 33412220987; VIN/body/axle-size confirmation required
View guideE36/E46 RWD Front Wheel Hubs, Dust Caps & One-Time Hardware
E36 non-M and E46 non-M rear-wheel-drive front hubs; E46 xi, M3 and compact-specific assumptions excluded
View guideE36 Non-M Brake Pads & Rotors: Body-Year and Kit-Contents Guide
E36 non-M 318i/is/ic, 323i/is/ic, 325i/is/ic and 328i/is/ic within the exact seller year/body applications; M3 and 318ti excluded
View guideE46 330 Brake Pads & Rotors: 330i, 330Ci and 330xi Fitment Guide
E46 330i/330Ci/330xi 2001-2006 as model/body-year seller applications state; M3 and smaller-engine brake packages excluded
View guideE46 ABS/DSC Wheel-Speed Sensors and Module Diagnosis
1999-2006 E46 ABS/ASC/DSC wheel-speed sensing. RWD/xi, early/late ABS versus DSC, axle, side and transmission can change the sensor.
View guideUS E46 M3 DSC Hydraulic Units: MK20, MK60 and Competition-Package Identification
US/LHD 2001-2006 BMW E46 M3 Coupe and Convertible factory DSC hydraulic units and attached electronic control units only. Resolve both VINs/build months, body, exact installed/service identities, early MK20 through 08/2002 versus late MK60 from 09/2002, and standard versus ZCP/Competition S7MA from 12/2004. Exclude non-M E46 RWD/xi, E36/Z3/Z4, CSL/non-US/RHD assumptions, unidentified universal units, mixed hydraulic/electronic halves, flood/fire/collision-contaminated donors, race-only controllers and DSC/ABS delete or bypass work.
View guideFirst-Generation FR-S/BRZ/86 Factory Brake Service: Standard vs Brembo
US-market 2013-2020 first-generation Scion FR-S, Subaru BRZ and Toyota 86. Standard and factory-installed Brembo systems are separate branches. Factory Brembo coverage is limited to documented BRZ Performance Package/special-edition and Toyota TRD package applications; verify VIN/build sheet and installed hardware. Non-US small-brake branches, conversions and 2022-and-later cars are excluded.
View guideFirst-Generation FR-S, BRZ and 86 Factory Road-Wheel and TPMS Package Identification
US-market first-generation rear-wheel-drive coupes only: 2013-2016 Scion FR-S, 2017-2020 Toyota 86 and 2013-2020 Subaru BRZ. This guide identifies factory road-wheel assemblies and their separate center-cap, lug-nut and TPMS service-package requirements by VIN, badge, model year, trim/package, factory brake package and wheel back-face evidence. Second-generation 2022-up GR86/BRZ, non-US or RHD applications, aftermarket wheels, spacers, track conversions and unsupported cross-badge interchange are excluded.
View guideFirst-Generation FR-S/BRZ/86 Brake Master Cylinder and Booster Diagnosis
2013-2020 first-generation FR-S, BRZ and Toyota 86. Confirm badge, VIN, transmission/production details and installed brake system.
View guideFRS/BRZ/86 Front Wheel Bearings & Hubs
First-generation 2013-2020 FR-S/BRZ/86; rear supersession also has broader Subaru and later-BRZ applications
View guideFRS/BRZ/86 Rear Wheel Bearings, Hubs & Axle Nuts
ZN6/ZC6
View guideFR-S/BRZ/86 Brembo Upgrade Paths & WRX STI Caliper Trap
First-generation 2013-2020 FR-S/BRZ/86 brake-upgrade guidance; WRX STI OE-caliper crossover is rejected
View guideFirst-Generation FR-S/BRZ/86 Wheel-Speed Sensors, ABS Wiring and Reluctor Diagnosis
First-generation Scion FR-S 2013-2016, Subaru BRZ 2013-2020 and Toyota 86 2017-2020; four wheel-speed sensor positions are distinct
View guideFirst-Generation FR-S/BRZ/86 Wheel Studs, Lug Nuts and Hub Damage
2013-2020 first-generation FR-S, BRZ and Toyota 86 with factory M12x1.25 wheel hardware. Confirm hub, stud knurl and wheel/lug-seat configuration.
View guideNA/NB Miata Brake Rotor and Caliper Fitment: Standard vs Sport
US-market 1990-1993 NA6, 1994-1997 NA8, 1999-2000 NB1, and 2001-2005 NB2. Explicitly split 2001-2002 standard brakes from Sport brakes; 2003-2005 use Sport-size applications in the checked sources.
View guideNA/NB Miata Front Hubs, Rear Wheel Bearings and ABS Fitment
US-market 1990-1993 NA6, 1994-1997 NA8, 1999-2000 NB1, and 2001-2005 NB2. Separate front bolt-on hub assemblies from rear press-in bearings and identify ABS hardware before ordering.
View guideNA/NB Miata Brake Master Cylinder, Booster and ABS Fitment
1990-2005 NA/NB Miata. Master-cylinder selection changes with ABS, year and later brake packages; booster and proportioning hardware are separate.
View guideFront Hubs & Bearings
S13 240SX 1989-94; S14 240SX 1995-98
View guideParking-Brake Cables & Z32 Drum-Conversion Paths
S13/S14 240SX; Z32 2+2 and R33 GT-S donor-cable paths
View guideZ32 Brake Swap & Master-Cylinder Guide
S13/S14 240SX with Z32 donor brake components
View guide1989-1998 Nissan 240SX Factory Brake Master Cylinders and Vacuum Boosters: S13/S14, ABS and Production Branches
US/LHD 1989-1998 Nissan 240SX S13 or S14 with factory vacuum-assisted brakes only. Resolve recipient VIN/build, generation, production, manual/automatic equipment, factory ABS status, exact master supplier/identity and bore, reservoir/level-switch, hydraulic port layout and exact booster/check-valve/vacuum-hose branch. Physically verify firewall studs, shell clearance, pedal clevis and pushrod length rather than inferring cross-generation fit. Exclude imported Silvia/180SX/200SX or RHD assumptions, Z32 upgrade/crossover claims, hydroboost, racing pedal boxes, ABS deletion, wheel-end brake scope and unverified used hydraulic seals or bypasses.
View guideFactory Front Brake Rotor, Caliper, Pad and Hose Fitment Guide
US-market 1989-1994 S13 and 1995-1998 S14 Nissan 240SX retaining factory single-piston front brakes; Z32, Q45 and other conversions are excluded.
View guideUS 240SX Factory Rear Disc Rotor, Caliper, Pad and Hose Fitment Guide
US-market 1989-1994 S13 and 1995-1998 S14 Nissan 240SX retaining factory single-piston rear calipers and 258x9 mm solid rear discs; imported-market brakes, Z32/Skyline conversions, big-brake kits and unknown modified hubs are excluded.
View guideS13/S14 5-Lug Conversion Hubs, Spindles & Rotor Trap
S13/S14
View guideS13/S14 Rear Wheel Bearings, Hubs and Axle-Nut Service
1989-1998 North American S13/S14 240SX rear wheel ends. Stock 4-lug, stock/converted 5-lug, ABS configuration, bearing and hub are separate identification points.
View guide2005-2014 Mustang ABS HCU, Pump and Electronic Module Identification
US/LHD 2005-2014 Ford Mustang factory four-wheel-ABS hydraulic control units and electronic controllers only. Resolve recipient and donor VINs/builds, original ABS equipment, 2005-2009 ABS/traction-control versus 2010-2014 AdvanceTrac generation, Base/V6/GT versus Shelby branches, the 2010 and 2011 production breaks, exact installed/service numbers, connector and six brake-line ports, configuration and written contents. Exclude non-ABS cars, S550, non-US/RHD assumptions, unidentified universal units, flood/fire/collision-contaminated donors, race-only controllers and ABS/traction/stability delete or bypass work.
View guideS197 Mustang Brake Package Guide: V6, GT, GT500, Boss and Factory Brembo Service Parts
2005-2014 S197 brake-package identification; V6, GT, GT500, Boss and factory Brembo paths kept separate
View guide2005-2014 Mustang Factory Wheels and TPMS: Package, Stagger and Brake-Clearance Identification
US/LHD 2005-2014 Ford Mustang S197 factory road wheels and matching factory TPMS service paths only. Resolve recipient VIN, model year, V6/GT/Bullitt/Boss/Shelby equipment, factory brake package, front versus rear position, wheel casting or service identity, measured diameter/width/offset/backspacing and hub-pilot fit before ordering. Exclude 2015-up S550, replica or generic aftermarket-wheel identity claims, tires presented as wheel-fitment proof, drag or race-wheel selection, unsupported cross-era/cross-trim interchange and any wheel whose load, structural repair or runout cannot be documented.
View guide2005-2014 Mustang Front Wheel Hubs, Bearings and ABS Sensor Checks
2005-2014 Mustang front hubs; Ford Performance M-1104-A explicitly supports V6, Boss, GT and Shelby GT500
View guide