Browse system: Brakes & wheel end

Jeep Grand Cherokee · Buyer's guide

2014–2015 Grand Cherokee front hub: complete assembly versus rear bearing

US 2014-2015 Jeep Grand Cherokee; exact engine, transmission, drivetrain, position and package boundaries in guide

Current seller options

WHERE TO BUY

Open an exact listing, then confirm fitment, stock, price, and shipping with the seller before ordering.

Seller links checked . Prices and availability can change.

What you need to know

The reviewed front wheel-end purchase for US 2014–2015 Jeep Grand Cherokee WK2 gas models is complete hub-and-bearing assembly 52124767AE. This guide covers the 3.6L Pentastar and 5.7L HEMI, eight-speed automatic, with rear-wheel drive or four-wheel drive. Establish the affected corner and VIN before ordering. The important distinction is front complete assembly versus rear wheel-end components, not an invented front 2WD/4WD split based on a neighboring part number. A product must be matched to the axle position as well as the vehicle family.

OEM numbers

52124767AE

Supersession

The current front service record replaces 52124767AB, 52124767AC and 52124767AD with 52124767AE. By contrast, 52124768AB appears as a separate rear bearing, and the 4779612 family is a rear hub purchase. They are not interchangeable front options because their numbers are close or a broad model table includes the same engines. Original and independent component evidence must be read with the front-position specification on the exact assembly. No separate bearing or rear hub is offered as a fallback when a complete front assembly is required.

Fitment

The reviewed front wheel-end purchase for US 2014–2015 Jeep Grand Cherokee WK2 gas models is complete hub-and-bearing assembly 52124767AE. This guide covers the 3.6L Pentastar and 5.7L HEMI, eight-speed automatic, with rear-wheel drive or four-wheel drive. Establish the affected corner and VIN before ordering. The important distinction is front complete assembly versus rear wheel-end components, not an invented front 2WD/4WD split based on a neighboring part number. A product must be matched to the axle position as well as the vehicle family.

Aftermarket options

Compare the delivered wheel flange, mounting interfaces, axle interface where applicable and sensor-related provisions against the original. Verify the included studs and hardware rather than treating a retailer photograph or an adjacent diagram callout as a contents guarantee. Diagnose the wheel-end complaint before ordering because tires, brakes and other faults can sound like a hub bearing. The vehicle having two front hubs does not make a pair purchase mandatory. Assess the other side separately. If corrosion or previous modifications affect the mounting area, factor that into the repair assessment rather than assuming the new assembly alone will solve the issue.

Before you buy

The selected exact destination showed matching identity and purchase capability when checked. That indication can change; confirm current stock and final VIN application before checkout. Have installation performed using the correct wheel-end procedure and ABS checks, without guessed torque values or a borrowed axle-nut rule. This page excludes diesel, SRT, Trackhawk and later WL coverage rather than extrapolating from a large seller compatibility list. No seller image or price is copied. If the offer disappears, the front assembly identity and rear-component exclusions remain useful for evaluating another exact destination, and a category or search page should never be labeled as the replacement listing.

Research and fitment sources