Browse system: Brakes & wheel end

Ford F-150 · Buyer's guide

2011-2014 Ford F-150 Front Hub: 2WD, 4WD and Heavy-Payload Differences

US 2011-2014 Ford F-150; exact engine, transmission, drivetrain, position and package boundaries in guide

Current seller options

WHERE TO BUY

Open an exact listing, then confirm fitment, stock, price, and shipping with the seller before ordering.

Seller links checked . Prices and availability can change.

What you need to know

This guide covers US 2011-2014 F-150 front wheel-end identification, not rear axle bearings or Super Duty trucks. The important buying split is drivetrain plus payload package. The factory-style front-brake catalog identifies CL3Z-1104-M for 4WD with base payload, CL3Z-1104-N for 2WD with base payload, and CL3Z-1104-K for the heavy-duty payload branch. The HD entry appears under both 2WD and 4WD, so drivetrain alone cannot select it. Count the actual wheel studs and confirm the original payload option using the VIN/build record. Regular Cab, SuperCab and SuperCrew descriptions are not an interchangeable substitute for those package checks. Raptor-specific selection is not released here without its own exact match.

OEM numbers

CL3Z-1104-MCL3Z-1104-NCL3Z-1104-KCL3Z-1104-LBL3Z-1104-ACL3Z-1104-ECL3Z-1104-FCL3Z-1104-G

Supersession

CL3Z-1104-M carries the BL3Z-1104-A/CL3Z-1104-A/CL3Z-1104-E chain. CL3Z-1104-N carries the BL3Z-1104-B/CL3Z-1104-B/CL3Z-1104-F chain. CL3Z-1104-K carries the BL3Z-1104-D/CL3Z-1104-C/CL3Z-1104-G chain. These suffixes identify different purchasing branches, not cosmetic revisions to swap freely. CL3Z-1104-L also appears in the catalog, but the available cross-check does not establish enough package detail to recommend it as another option. It receives no purchase card in this guide.

Fitment

This guide covers US 2011-2014 F-150 front wheel-end identification, not rear axle bearings or Super Duty trucks. The important buying split is drivetrain plus payload package. The factory-style front-brake catalog identifies CL3Z-1104-M for 4WD with base payload, CL3Z-1104-N for 2WD with base payload, and CL3Z-1104-K for the heavy-duty payload branch. The HD entry appears under both 2WD and 4WD, so drivetrain alone cannot select it. Count the actual wheel studs and confirm the original payload option using the VIN/build record. Regular Cab, SuperCab and SuperCrew descriptions are not an interchangeable substitute for those package checks. Raptor-specific selection is not released here without its own exact match.

Aftermarket options

Compare an exact hub-and-bearing unit against another unit only after resolving the package. Check stud count, drive-spline requirements, ABS sensing arrangement, connector routing, supplied fasteners and whether the offer is one unit or a pair. A title saying front left or right does not mean the box contains both sides. A 4WD Integrated Wheel End actuator is a separate component from the hub bearing assembly; replacing every noisy wheel end with a hub is not a sound diagnostic shortcut. Historical IWE bulletins are not presented here as current repair instructions. The appropriate inspection should distinguish bearing play, tire noise, brake interference and engagement-system problems before parts are ordered.

Before you buy

Brake and wheel retention are safety-critical. Use the current factory procedure, correct replacement hardware and VIN-specific tightening requirements rather than a torque figure copied from another generation. This guide intentionally starts at 2011; 2009-2010 hub numbers are not automatically carried forward. The three exact purchase references are conditional alternatives, never a claim that all three fit every truck.

Research and fitment sources