Browse system: Brakes & wheel end
2008 Grand Prix 3.8 rear ABS hub: 13585741 versus front hubs
US 2008 Pontiac Grand Prix; original-number, engine, gearbox, drivetrain, trim, axle, side and equipment gates in guide
WHERE TO BUY
Open an exact listing, then confirm fitment, stock, price, and shipping with the seller before ordering.
Seller links checked . Prices and availability can change.
This independently researched rear-hub decision covers a US 2008 Pontiac Grand Prix3.8L V6, automatic transaxle and front-wheel drive, with ABS confirmed. Identify the rear axle and affected corner first. It is not the queued front-hub topic under another title, and the current front assembly19433930 is not a substitute for the selected rear unit. This bounded scope does not extend to the GXP or older years simply because the retailer lists them elsewhere. A broad bearing search is not an axle-position check.
OEM numbers
13585741Supersession
13585741 is the exact reviewed rear hub-and-bearing assembly. The manufacturer names the rear position, wheel-speed sensor and wheel studs, while the independent2008 Grand Prix rear-wheel diagram distinguishes the ABS branch.19122338 is described as a rear non-ABS family and was unavailable; it is not an interchangeable lower-priced choice. The front 84641365/19433930 chain remains a separate assembly. There is no inferred supersession between front, rear, ABS and non-ABS numbers. Reconcile an older installed rear label through the exact VIN application before ordering.
Fitment
This independently researched rear-hub decision covers a US 2008 Pontiac Grand Prix3.8L V6, automatic transaxle and front-wheel drive, with ABS confirmed. Identify the rear axle and affected corner first. It is not the queued front-hub topic under another title, and the current front assembly19433930 is not a substitute for the selected rear unit. This bounded scope does not extend to the GXP or older years simply because the retailer lists them elsewhere. A broad bearing search is not an axle-position check.
Aftermarket options
Compare one complete ABS rear hub/bearing assembly against another with the same interface and supplied studs/sensor configuration. The vehicle’s quantity two indicates two rear positions, not two units in each retail box. A loose wheel-speed sensor, bare bearing or complete knuckle changes the product scope. Establish required mounting hardware separately from service information and the actual seller’s contents list. A generic ABS-compatible phrase must not transfer an image, price or included component from a front hub to this rear one. Only the exact current product is attached as a purchase destination.
Before you buy
Bearing noise can resemble tire or brake noise, and an ABS fault can originate in wiring rather than the bearing assembly. Have the failed component and position diagnosed before ordering. Installation requires the correct rear suspension and fastener procedure; the guide supplies no improvised torque specification. Inspect the delivered service number and electrical interface before installation. Limited verified supplier depth: one retailer’s exact product passed the dated cart/stock check, without guaranteed future inventory. If ABS equipment, axle position or the original hub cannot be reconciled, hold the purchase instead of choosing a visually similar front or non-ABS part.
Research and fitment sources
Supersede reviewed 6 unique research sources for this guide. 1 also appears above as a seller or official action and is not repeated here; 5 additional citations follow.
Research last verified .
