Browse system: Steering & suspension

Jeep Grand Cherokee · Buyer's guide

2014–2015 Grand Cherokee 3.6 front lower arms: left/right and engine exclusion

US 2014-2015 Jeep Grand Cherokee; exact engine, transmission, drivetrain, position and package boundaries in guide

Current seller options

WHERE TO BUY

Open an exact listing, then confirm fitment, stock, price, and shipping with the seller before ordering.

Seller links checked . Prices and availability can change.

What you need to know

This front lower control-arm guide is limited to US 2014–2015 Jeep Grand Cherokee WK2 vehicles with the 3.6L Pentastar V6, eight-speed automatic and rear-wheel drive or four-wheel drive. Current complete arm 5168159AB is left/driver side; 5168158AB is right/passenger side. Confirm the VIN, front axle position and old arm identity before selecting a seller card. The guide does not extend the pair to every 5.7L, diesel or SRT vehicle just because a broad product table includes those engines somewhere in its historical application list.

OEM numbers

5168159AB | 5168158AB

Supersession

The original 2015 suspension diagram lists this pair in the ERB 3.6L branch and separately lists 5181833AA/5181834AA with other engine qualifiers. The reviewed left service chain includes 5168159AA and 68022601AD, while the right chain includes 5168158AA and 68022600AD. Keep those histories and side assignments together. Upper arms and rear lower links found in a broad search are different components. A similar arm photograph or shared WK2 body does not prove the same geometry, bushing specification or engine/equipment application.

Fitment

This front lower control-arm guide is limited to US 2014–2015 Jeep Grand Cherokee WK2 vehicles with the 3.6L Pentastar V6, eight-speed automatic and rear-wheel drive or four-wheel drive. Current complete arm 5168159AB is left/driver side; 5168158AB is right/passenger side. Confirm the VIN, front axle position and old arm identity before selecting a seller card. The guide does not extend the pair to every 5.7L, diesel or SRT vehicle just because a broad product table includes those engines somewhere in its historical application list.

Aftermarket options

Decide between a complete arm and an individually identified repair part after the actual worn or damaged component has been established. Compare joint, bushing and hardware contents with the labor involved, and do not assume that every assembly listing supplies all fasteners shown in the original diagram. If the vehicle has collision damage, a lift or altered suspension, assess the mounting points and configuration separately. A clunk, pull or tire-wear symptom is not a diagnosis by itself. Replacing an arm does not guarantee an alignment problem will disappear when another component or the mounting structure is damaged.

Before you buy

Both exact destinations were purchase-capable at the dated check and have explicit side labels. Each card represents one arm, not a pair or a requirement to replace both sides. Confirm quantity, current stock, included components and the final VIN/equipment match before paying. Suspension work and alignment should follow the vehicle-specific procedure; this guide provides no guessed torque or tightening-position instruction. Diesel, 5.7L, SRT, Trackhawk and later WL applications remain excluded until independently developed. If a retailer stops carrying a part, retain the engine, side and service-chain boundaries when evaluating another exact offer instead of substituting an available upper or rear arm.

Research and fitment sources