Browse system: Cooling

Ford F-150 · Buyer's guide

2011-2014 Ford F-150 Water Pump: Engine and Three/Four-Bolt Flanges

US 2011-2014 Ford F-150; exact engine, transmission, drivetrain, position and package boundaries in guide

Current seller options

WHERE TO BUY

Open an exact listing, then confirm fitment, stock, price, and shipping with the seller before ordering.

Seller links checked . Prices and availability can change.

What you need to know

For US 2011-2014 F-150s, the 3.7L naturally aspirated V6, 3.5L EcoBoost V6, 5.0L V8 and 6.2L V8 do not share one water pump. BR3Z-8501-T is the documented 3.7L service branch. The 3.5L catalog separates a four-bolt pulley flange from a later three-bolt flange: ER3Z-8501-C continues the BL3Z-8501-A four-bolt chain, while BL3Z-8501-C is explicitly described for a three-bolt flange. BR3Z-8501-S is supported here only for the documented 2013-2014 5.0L branch. AL3Z-8501-D is the 6.2L service reference. The guide does not qualify a 2011-2012 5.0L pump by extrapolating from the later listing.

OEM numbers

BR3Z-8501-TER3Z-8501-CBL3Z-8501-CBR3Z-8501-SAL3Z-8501-DBR3Z-8501-GBL3Z-8501-A

Supersession

BR3Z-8501-T replaces BR3Z-8501-G and other listed 3.7L repair references; the current page calls it a water-pump repair kit, so verify box contents rather than reading kit as every cooling-system part. ER3Z-8501-C replaces BL3Z-8501-A/PW-522. BR3Z-8501-S carries the BR3Z-8501-J/PW-547 chain. AL3Z-8501-D replaces AL3Z-8501-A, AC3Z-8501-A and AL3Z-8501-C. A supersession within one engine/flange branch does not authorize crossing into another engine or changing the installed pulley arrangement.

Fitment

For US 2011-2014 F-150s, the 3.7L naturally aspirated V6, 3.5L EcoBoost V6, 5.0L V8 and 6.2L V8 do not share one water pump. BR3Z-8501-T is the documented 3.7L service branch. The 3.5L catalog separates a four-bolt pulley flange from a later three-bolt flange: ER3Z-8501-C continues the BL3Z-8501-A four-bolt chain, while BL3Z-8501-C is explicitly described for a three-bolt flange. BR3Z-8501-S is supported here only for the documented 2013-2014 5.0L branch. AL3Z-8501-D is the 6.2L service reference. The guide does not qualify a 2011-2012 5.0L pump by extrapolating from the later listing.

Aftermarket options

The decisive physical comparison is the pump housing and mounting arrangement together with the installed pulley flange. Confirm bolt count, hose connections, mating surfaces and whether seals or a pulley are supplied. A picture of a similar-looking casting is not a substitute for the exact part number. If comparing an aftermarket pump, require its own manufacturer application and contents list; an OE number mentioned in a marketplace title alone is not a validated equivalent. Check the source of a coolant leak before purchase: a hose joint, thermostat housing or another cooling leak can leave residue near a pump without establishing pump failure.

Before you buy

This is an external truck cooling-system selection guide, not advice based on a transverse Ford V6 with a different pump arrangement. Use a cool, depressurized system and the current service procedure for removal, sealing, refill and air removal. No coolant mixture, tightening torque or labor shortcut is invented here. Unsupported early 5.0L and 2009-2010 engine branches remain outside the qualified purchase scope.

Research and fitment sources