Parts catalog results

Body, glass & interior for FR-S / BRZ / 86

20 matching parts guides.

Jump to matching guidesBrowse all vehicle families and systems

Shop by vehicleSelect your exact car
or search the parts catalog
Filter guides2 active
Clear all filters
Part category
Vehicle family
FRS/BRZ/86

FRS/BRZ/86 Crash Bar & Front Collision Parts

First-generation ZN6/ZC6 front collision beam; verified BRZ catalog description 2013-2016, later first-gen use requires VIN confirmation

View guide
FRS/BRZ/86

First-Generation FR-S/BRZ/86 Window Regulators, Motors, Switches and Glass Indexing

Scion FR-S 2013-2016, Subaru BRZ 2013-2020 and Toyota 86 2017-2020 frameless-door windows; early BRZ bulletins retain their stated years

View guide
FRS/BRZ/86

First-Generation FR-S/BRZ/86 Door Latches, Lock Actuators and Smart-Entry Splits

Scion FR-S 2013-2016, Subaru BRZ 2013-2020 and Toyota 86 2017-2020; door latch/actuator path must match side and smart-entry equipment

View guide
FRS/BRZ/86

First-Generation FR-S/BRZ/86 Roof-Side Weatherstrips and Window-Seal Diagnosis

2013-2020 first-generation FR-S, BRZ and Toyota 86 frameless-door body. Right and left roof-side seals are different; verify badge/VIN catalog and side.

View guide
FRS/BRZ/86

First-Generation FR-S/BRZ/86 Front Fascia Identification: Pre-Facelift vs Facelift

2013-2016 Scion FR-S (ZN6), 2013-2016 Subaru BRZ (ZC6), 2017-2020 Toyota 86 (ZN6) and 2017-2020 Subaru BRZ (ZC6); U.S.-market outer front fascia, grille, bezel and fog/DRL identification only.

View guide
FRS/BRZ/86

First-Generation FR-S/BRZ/86 Exterior Door Handles: Smart Entry, Finish and Side-Specific Bases/Caps

US/LHD 2013-2016 Scion FR-S, 2013-2020 Subaru BRZ and 2017-2020 Toyota 86 exterior pull handles, handle-mounted smart-entry sensing, side-specific bases/caps and driver key-cylinder trim. RHD/non-US applications and second-generation 2022-and-later cars are excluded.

View guide
FRS/BRZ/86

First-Generation FR-S, BRZ and 86 Rear Bumper Covers: Badge, Facelift and 2019 BRZ Identification

US-market first-generation FA20 coupes only: 2013-2016 Scion FR-S, 2017-2020 Toyota 86 and 2013-2020 Subaru BRZ. This guide identifies the factory rear bumper face, badge/model-year branch, related retainers and caps, the 2019 BRZ production change, the separate center backup lamp and the optional Subaru rear under-diffuser accessory. Global-market Toyota GT86/JDM variants, 2022-up GR86 and second-generation BRZ, sensor-cut covers, collision beams and absorbers, and aftermarket/TRD/STI body kits are excluded unless an exact VIN-specific catalog says otherwise.

View guide
FRS/BRZ/86

First-Generation FR-S, BRZ and 86 Factory Trunk Lid and Attached-Equipment Identification

US-market first-generation coupes only: 2013-2016 Scion FR-S, 2013-2020 Subaru BRZ and 2017-2020 Toyota 86. Resolve the 17-character VIN, badge, model year, grade/package, production date, factory spoiler and rear-camera equipment before ordering. This guide identifies the deck-lid shell and its separately cataloged garnish, emblem/nameplate, license-lamp, camera, request-switch, hinge, paired support-stay, latch, striker, stop, seal and wiring provisions. Exclude second-generation 2022-up GR86/BRZ, non-US or RHD catalog assumptions, carbon/fiberglass or other aftermarket panels, and unsupported Toyota/Scion/Subaru cross-badge interchange.

View guide
FRS/BRZ/86

First-Generation FR-S, BRZ and 86 Factory Front Fenders: Side, Liner, Extension and Garnish Identification

US/LHD first-generation factory front-fender applications only: 2013-2016 Scion FR-S, 2013-2020 Subaru BRZ and 2017-2020 Toyota 86. Resolve the recipient VIN, badge, model year, build date, trim or special edition, paint code and left/driver versus right/passenger side before ordering. Scope includes the bolt-on outer fender shell, separate liner or mud guard, wheel-opening pad or extension bracket, and badge-specific outer garnish/emblem. Exclude 2022-up GR86/BRZ, imported GT86/JDM/RHD marker-cut assumptions, rear quarter panels, bumper covers and lamps, fixed inner apron or rail structure, widebody/overfender conversions and unsupported cross-badge or cross-side swaps.

View guide
FRS/BRZ/86

First-Generation FR-S, BRZ and 86 Front Door Shells: Side, Hinges, Check Straps and Bare-versus-Loaded Identification

US/LHD first-generation factory front-door-shell applications only: 2013-2016 Scion FR-S, 2013-2020 Subaru BRZ and 2017-2020 Toyota 86, separated by Toyota/Scion versus Subaru catalog identity and left/driver versus right/passenger side. Resolve the recipient VIN, badge, model year/build, trim or special edition, smart/advanced-keyless equipment, mirror and harness provisions, paint code and exact listing contents before ordering. Exclude 2022-up GR86/BRZ, non-US/RHD assumptions, rear quarter panels, aftermarket skins, frameless-glass conversions, unsupported cross-badge claims and vehicles with unmeasured hinge-pillar, rocker, roof-rail or latch-pillar collision damage. A seller's 2021 or GR86 title does not extend this first-generation catalog scope.

View guide
FRS/BRZ/86

First-Generation FR-S, BRZ and 86 Factory Aluminum Hoods: Badge Catalog, Insulator, Washer, Hinge, Prop and Latch Identification

US/LHD first-generation factory hood applications only: 2013-2016 Scion FR-S, 2013-2020 Subaru BRZ and 2017-2020 Toyota 86. Resolve the 17-character VIN, badge, model year/build, trim or special edition, installed Toyota/Scion versus Subaru catalog identity, paint code and exact hood, insulation, washer, hinge, prop, latch and seal contents before ordering. Toyota/Scion and Subaru retain separate service-number families even where sellers group the three badges. Exclude 2022-up GR86/BRZ, non-US/RHD assumptions, aftermarket carbon/fiberglass panels presented as factory interchange, unsupported cross-badge or facelift claims, and vehicles with unmeasured hinge-apron, upper tie-bar, fender, headlamp-support or latch-support collision damage.

View guide
FRS/BRZ/86

First-Generation FR-S/BRZ/86 Front-Seat Frame, Rail, Side-Airbag and Passenger-Occupant-System Identification

US/LHD first-generation 2013-2020 Scion FR-S, Subaru BRZ and Toyota 86 factory manually adjusted front-seat donors only. Prove recipient and donor VIN/build, badge, model year/production, LH driver versus RH passenger side, trim/upholstery, manual/lifter equipment, heater state, frame/rail identity, harness connectors, seat-mounted side airbag, and passenger occupant-detection hardware. Exclude second-generation GR86/BRZ, non-US/RHD, rear seats, belt-only scope, universal/race seats, and any bypass or damaged donor.

View guide
FRS/BRZ/86

First-Generation FR-S/BRZ/86 Separate Rear Cushions and Bench Backrest Identification

US-market first-generation 2013-2020 Scion FR-S, Subaru BRZ and Toyota 86 factory rear seating only: separate LH and RH lower cushion pieces plus one bench-type folding backrest. Prove recipient and donor VIN/build, badge, production, trim/upholstery/color, frame/pads/covers, hinge/lock/striker state, release hardware and written contents. Exclude front seats, 2022-up GR86/BRZ, non-US/RHD assumptions, restraint-anchor substitution and crash, fire, flood or contaminated donors.

View guide
FRS/BRZ/86

US/LHD First-Generation Scion FR-S, Subaru BRZ and Toyota 86 Factory Dashboard Identification

US/LHD first-generation 2013-2016 Scion FR-S, 2013-2020 Subaru BRZ and 2017-2020 Toyota 86 factory instrument-panel/dash pad donors only. Prove both VINs/builds, brand/model year/production, LHD configuration, pad identity, reinforcement/carrier, passenger-airbag and SRS state, ducts/vents, knee/glove/cluster/center trim, brackets, harness interfaces, color, condition and written contents. Exclude second-generation GR86/2022-up BRZ, RHD assumptions, deployed restraints, custom-cut panels and cracked, warped, collision-, fire- or flood-damaged donors.

View guide
FRS/BRZ/86

US/LHD First-Generation FR-S, BRZ and Toyota 86 Factory Headliner and Written Overhead-Contents Identification

US/LHD first-generation 2013-2016 Scion FR-S, 2013-2020 Subaru BRZ and 2017-2020 Toyota 86 factory molded headliner donors only, narrowed to checked badge, production and overhead-equipment branches. Prove both VINs/builds, exact badge/model, production, trim/equipment, black shade, molded-board identity, curtain-airbag and pillar interfaces, visor/lamp/microphone or antenna openings, condition and written contents. Exclude 2022-up GR86/BRZ, non-US/RHD assumptions, cross-badge interchange without exact proof, and crushed, cut, wet, moldy, smoke-, pest-, fire- or flood-contaminated donors.

View guide
FRS/BRZ/86

US First-Generation FR-S, BRZ and Toyota 86 Molded Floor-Carpet and Insulation Identification

US/LHD first-generation 2013-2016 Scion FR-S, 2013-2020 Subaru BRZ and 2017-2020 Toyota 86 factory molded passenger-compartment floor carpet and checked insulation pieces only, narrowed by badge, production, transmission/tunnel interfaces, color and exact openings. Prove both VINs/builds, badge/model, production, molded identity, manual/automatic console and tunnel geometry, seat/belt/HVAC openings, backing, contamination history, condition and written contents. Exclude 2022-up GR86/BRZ, loose floor mats represented as molded carpet, trunk carpet, structural floor repair, cross-badge interchange without exact proof and cut, wet, moldy, burned, pest-, smoke-, flood- or biohazard-contaminated donors.

View guide
FRS/BRZ/86

US First-Generation FR-S, BRZ and Toyota 86 Interior Door-Panel, Side and Grade Identification

US/LHD first-generation 2013-2016 Scion FR-S, 2013-2020 Subaru BRZ and 2017-2020 Toyota 86 factory interior front-door trim panels/cards only, narrowed by badge, production, physical side, interior grade/color and speaker/switch/handle openings. Prove both VINs/builds, badge/model, production, driver/left or passenger/right side, molded identity, grade/color, equipment layout, moisture barrier, condition and written contents. Exclude 2022-up cars, door shells represented as trim panels, non-US/RHD assumptions, cross-badge interchange without exact proof and warped, delaminated, wet, moldy, cut or heavily repaired donors.

View guide
FRS/BRZ/86

US First-Generation FR-S, BRZ and Toyota 86 Trunk-Carpet and Cargo-Trim Identification

US/LHD first-generation 2013-2016 Scion FR-S, 2013-2020 Subaru BRZ and 2017-2020 Toyota 86 factory luggage-compartment carpet, cargo-floor mat/board, side trim and checked spare/tool covers only, narrowed by badge, production, spare/tool/audio layout, physical section, color and exact fasteners. Prove both VINs/builds, badge, production, equipment, molded identity, section count, backing, condition and written contents. Exclude trunk lids, passenger-compartment carpet, 2022-up cars and cut, wet, moldy, burned, pest-, smoke-, flood- or biohazard-contaminated donors.

View guide
FRS/BRZ/86

US/LHD First-Generation FR-S, BRZ and Toyota 86 Center-Console and Shifter-Trim Identification

US/LHD 2013-2020 first-generation Scion FR-S, Subaru BRZ and Toyota 86 factory center-console boxes, upper/selector finishers, shifter boots, parking-brake trim and checked cubby/cupholder pieces only, narrowed by badge, production, manual/automatic transmission, switch/cupholder equipment, finish/color and exact openings. Prove both VINs/builds, production, transmission, equipment, molded identity, mounts, condition and written contents. Exclude 2022-up GR86/BRZ, mechanical shifter or parking-brake internals, dashboard/carpet and cracked, cut, warped, liquid-damaged or hidden-repair donors.

View guide
FRS/BRZ/86

First-Generation FR-S/BRZ/86 Steering-Wheel and Spiral-Cable Identification

Identification-only guide for US/LHD first-generation Scion FR-S, Subaru BRZ and Toyota 86 factory bare steering wheels, separately identified driver-restraint modules, spiral cable/steering roll connector and switches only, narrowed by badge, production, pre-facelift/facelift, manual or automatic/paddle equipment, audio/steering controls, connectors and written loaded contents. Seller paths cover bare/custom wheels or spiral cables only; they are not recommendations to buy or reuse an airbag. Exclude second-generation cars, cross-badge cosmetic assumptions, non-US/RHD parts, columns/racks, quick releases and deployed, altered, recalled or provenance-unknown modules from crash/flood/fire donors.

View guide