Browse system: Steering & suspension
2012–2013 Beetle lower arms: left 561-407-151-C versus right 152-C
US 2012–2013 Volkswagen Beetle; exact engine, transmission, drivetrain, position and package boundaries in guide
WHERE TO BUY
Open an exact listing, then confirm fitment, stock, price, and shipping with the seller before ordering.
Seller links checked . Prices and availability can change.
For a US 2012–2013 A5 Beetle 2.5 coupe, identify the side before choosing a front lower control arm. 561-407-151-C is the left/driver-side arm and 561-407-152-C is the right/passenger-side arm on a left-hand-drive US car. The selected factory powertrain is the naturally aspirated five-cylinder with front-wheel drive and either five-speed manual or six-speed Tiptronic. This is not an all-generation Beetle suspension claim, and it does not qualify an earlier New Beetle, convertible, TDI, Turbo or a modified suspension simply because the catalog shares some references.
OEM numbers
561-407-151-C | 561-407-152-CSupersession
The reviewed C arms have 561-407-151-A and 561-407-152-A respectively in their service histories. Keep each replacement chain on its own side; a final-digit difference changes which arm is supplied. Independent descriptions contain both sides of an October 2012 production split, so the VIN and original arm still need confirmation rather than treating a calendar year as a full configuration. The separate lower ball-joint references are different products. No claim is made that a part number for a ball joint or a repair bushing supersedes to a complete arm.
Fitment
For a US 2012–2013 A5 Beetle 2.5 coupe, identify the side before choosing a front lower control arm. 561-407-151-C is the left/driver-side arm and 561-407-152-C is the right/passenger-side arm on a left-hand-drive US car. The selected factory powertrain is the naturally aspirated five-cylinder with front-wheel drive and either five-speed manual or six-speed Tiptronic. This is not an all-generation Beetle suspension claim, and it does not qualify an earlier New Beetle, convertible, TDI, Turbo or a modified suspension simply because the catalog shares some references.
Aftermarket options
Bushings are identified with the reviewed arm descriptions, but that does not establish that a ball joint or every installation fastener is included. Compare the actual box contents and joint attachment arrangement before weighing a bare arm against an aftermarket arm-and-ball-joint kit. One seller card represents one side, not a pair. Ask whether the assembly uses the correct original mounting geometry and whether required hardware is supplied separately. A steel stamping that looks similar in a thumbnail is not a verified equivalent; no aftermarket cross-reference is approved here without its own application and contents evidence.
Before you buy
A knock, tire wear or steering pull is a reason for suspension inspection, not proof both arms need replacement. Follow factory support, fastener and alignment procedures, and include any required alignment in the repair budget. Do not substitute the wrong side or force mounting points to line up. Before installation, read the number on each delivered arm and compare it with the approved side-specific invoice. Current cart availability is only a dated retailer indication. If one side becomes unavailable, do not imply the other side completes the repair; qualify that missing side independently.
Research and fitment sources
Supersede reviewed 9 unique research sources for this guide. 2 also appear above as a seller or official action and are not repeated here; 7 additional citations follow.
Research last verified .
