Browse system: Steering & suspension

Subaru Impreza · Buyer's guide

Subaru Impreza 2012–2016 lower arms: current right 20202FJ001 and left 20202FJ011

US 2012–2016 Subaru Impreza; exact engine, transmission, drivetrain, position and package boundaries in guide

Current seller options

WHERE TO BUY

Open an exact listing, then confirm fitment, stock, price, and shipping with the seller before ordering.

Seller links checked . Prices and availability can change.

What you need to know

For original US 2012–2016 GP/GJ Impreza sedans and five-door hatchbacks with the 2.0L naturally aspirated engine and AWD, the reviewed front lower arms are 20202FJ001 on the right/passenger side and 20202FJ011 on the left/driver side. Original five-speed manual and CVT cars remain within their factory trim combinations; Limited trims are CVT-only. The selections are individual sides, not a two-arm kit. WRX/STI turbo suspension, hybrid applications, modified geometry and the 2017 redesign are excluded. Confirm the actual affected corner and original arm before ordering.

OEM numbers

20202FJ001 | 20202FJ011

Supersession

The current right FJ001 record replaces 20202FJ000, and the left FJ011 record replaces 20202FJ010. Keep those two supersession chains separate. Earlier pages can still display Add to Cart while pointing to the current service number; they are research history, not the selected destination. Rear upper arms in the 20252 family are also not front lower-arm alternatives. Independent OEM records preserve the current side-specific identities. A similar suffix or a shared Impreza catalog heading does not authorize switching sides or using a rear link to repair the front suspension.

Fitment

For original US 2012–2016 GP/GJ Impreza sedans and five-door hatchbacks with the 2.0L naturally aspirated engine and AWD, the reviewed front lower arms are 20202FJ001 on the right/passenger side and 20202FJ011 on the left/driver side. Original five-speed manual and CVT cars remain within their factory trim combinations; Limited trims are CVT-only. The selections are individual sides, not a two-arm kit. WRX/STI turbo suspension, hybrid applications, modified geometry and the 2017 redesign are excluded. Confirm the actual affected corner and original arm before ordering.

Aftermarket options

Compare complete lower arms with their actual delivered bushings, joints and hardware. Do not infer that an OEM arm includes the same ball joint as an aftermarket arm-and-ball-joint kit. Those are different package-content decisions even when both reference the original arm number. Separately pressed bushings may be a viable repair only after the arm and joint condition have been assessed. An aftermarket equivalent needs the correct side and current/original cross-reference, not a generic Subaru control-arm photograph. Verify which fasteners must be replaced and which related components are not supplied before comparing the complete repair cost.

Before you buy

Have clunks, damaged bushings, joint play and tire-wear symptoms inspected before buying an assembly. Safe installation, exact fasteners and the required final alignment/inspection matter; no universal torque or lowered-suspension clearance assurance is supplied here. Both selected new current-number pages had purchase paths when checked, not reserved inventory. A collision repair, changed knuckle or unidentified prior arm requires separate installed-part identification. Keeping the current number, side and delivered contents together avoids ordering a plausible old-number arm or an incomplete kit that cannot finish the intended repair. The advice remains useful when an individual merchant changes its stock.

Research and fitment sources