Browse system: Steering & suspension

Subaru Forester · Buyer's guide

2014–2018 Subaru Forester front lower arms: left/right service revisions

US 2014-2018 Subaru Forester; exact engine, transmission, drivetrain, position and package boundaries in guide

Current seller options

WHERE TO BUY

Open an exact listing, then confirm fitment, stock, price, and shipping with the seller before ordering.

Seller links checked . Prices and availability can change.

What you need to know

For a US 2014–2018 Subaru Forester front lower control-arm order, establish the side and complete service identity before comparing offers. Current assembly 20202SG012 is left/driver side; 20202SG002 is right/passenger side. This guide covers the AWD SJ family, with 2.5i naturally aspirated and 2.0XT turbo engines. The US XT uses CVT, while eligible 2.5i trims can have six-speed manual or CVT. Those vehicle scopes support finding the guide; the final arm must still be matched to the VIN and actual suspension.

OEM numbers

20202SG012 | 20202SG002

Supersession

The reviewed service chain takes the left SG010/SG011 branch to 20202SG012 and the right SG000/SG001 branch to 20202SG002. Keep the side-specific chains separate. The original front-suspension diagrams place these arms differently from the rear upper 20252-series parts that can appear in a broad control-arm search. Similar model coverage is not enough to turn a rear arm into a front lower substitute. A revision suffix can identify a current service part without proving that an unrelated arm from another Subaru has equivalent geometry or contents.

Fitment

For a US 2014–2018 Subaru Forester front lower control-arm order, establish the side and complete service identity before comparing offers. Current assembly 20202SG012 is left/driver side; 20202SG002 is right/passenger side. This guide covers the AWD SJ family, with 2.5i naturally aspirated and 2.0XT turbo engines. The US XT uses CVT, while eligible 2.5i trims can have six-speed manual or CVT. Those vehicle scopes support finding the guide; the final arm must still be matched to the VIN and actual suspension.

Aftermarket options

Choose a complete arm or a component repair based on the diagnosed condition. Compare bushings, joint coverage, supplied hardware and labor rather than assuming all complete-arm offers have identical contents. A bushing-only kit may require separate equipment and leave other worn components in service. If an arm is bent, assess mounting points and adjacent parts, especially on a vehicle with collision damage or suspension modifications. A clunk or pull does not establish the arm as the sole fault. Alignment requirements should be part of the repair assessment rather than an assurance that any new arm will correct the symptom.

Before you buy

Both exact current OEM destinations were purchase-capable when reviewed, and each is labeled for one side. Two cards are not a packaged pair or an automatic recommendation to replace both sides. Confirm quantity, included components, current availability and final VIN fitment before paying. Use the vehicle-specific suspension procedure for tightening and alignment; this guide does not infer torque figures from a different Subaru. Earlier generations, overseas diesel applications, rear links and later SK arms are excluded. If an offer disappears, the position and service-chain information remains a useful purchase checklist instead of a reason to substitute whatever generic control arm is still available.

Research and fitment sources