Browse system: Steering & suspension

Nissan Sentra · Buyer's guide

2007–2012 Sentra Lower Arms: 54500-ET00C Right vs 54501-ET00C Left

US 2007-2012 Nissan Sentra; exact engine, transmission, drivetrain, position and package boundaries in guide

Current seller options

WHERE TO BUY

Open an exact listing, then confirm fitment, stock, price, and shipping with the seller before ordering.

Seller links checked . Prices and availability can change.

What you need to know

The full part number matters when buying a B16 Sentra lower arm: both current choices end in ET00C, but their leading digits identify opposite sides. For the scoped US 2007–2012 FWD sedan, 54500-ET00C is front right/passenger and 54501-ET00C front left/driver. The original front-suspension diagram calls them transverse links, which is why a search for control arm may show apparently different names for the same component family. The 2.0L MR20DE and 2.5L QR25DE branches still need exact VIN verification; the guide does not include a 2013-up B17 arm.

OEM numbers

54500-ET00C | 54501-ET00C

Supersession

The documented current service products replace their respective ET000 and related earlier side-specific references. Right stays right throughout a valid supersession; a shared suffix is not permission to reverse sides. The independent Nissan catalog describes complete arms with ball joint and bushings, while supporting bolts and nuts are separate callouts. Confirm the actual package offered by the exact seller and count the number of arms supplied. A bushing kit, ball joint or stabilizer link is not a cheaper equivalent of a complete control-arm assembly.

Fitment

The full part number matters when buying a B16 Sentra lower arm: both current choices end in ET00C, but their leading digits identify opposite sides. For the scoped US 2007–2012 FWD sedan, 54500-ET00C is front right/passenger and 54501-ET00C front left/driver. The original front-suspension diagram calls them transverse links, which is why a search for control arm may show apparently different names for the same component family. The 2.0L MR20DE and 2.5L QR25DE branches still need exact VIN verification; the guide does not include a 2013-up B17 arm.

Aftermarket options

A complete arm may reduce the number of reused wear components, but it should not be purchased automatically when only a different suspension item has failed. Have the condition of the arm, joints, bushings and mounting points inspected. Compare the complete repair cost, including labor and alignment where required, against any source-supported individual-component repair. For an aftermarket arm, require manufacturer evidence for the same side and application rather than trusting a picture of a roughly triangular arm or a list that mentions Sentra alongside several unrelated vehicles.

Before you buy

SE-R and Spec V names do not remove the need to confirm installed equipment, especially after collision or suspension modifications. This page supplies no approval for altered geometry or universal performance arms. Follow the correct service information for fasteners, bushing loading and final inspection; no generic torque or reuse assumption is made. Record the confirmed part number before checkout, match it to the shipping label, and reject an opposite-side or incomplete item before installation. The dated purchase-capability check is not a stock reservation, pair quantity or blanket promise of fitment.

Research and fitment sources