Browse system: Steering & suspension

Nissan Rogue · Buyer's guide

2008–2013 Rogue Lower Arms: 54500-JG00B Right vs 54501-JG00B Left

US 2008-2013 Nissan Rogue; exact engine, transmission, drivetrain, position and package boundaries in guide

Current seller options

WHERE TO BUY

Open an exact listing, then confirm fitment, stock, price, and shipping with the seller before ordering.

Seller links checked . Prices and availability can change.

What you need to know

A Rogue lower-arm order needs the full number, not just the shared JG00B suffix. In the scoped US 2008–2013 first-generation 2.5L CVT crossover, 54500-JG00B identifies the front right/passenger-side lower arm and 54501-JG00B the front left/driver-side arm. The original diagram calls these transverse links. That terminology should not send a buyer toward a rear lateral link or upper arm from the same search result. FWD/AWD, build and installed equipment still belong in the VIN-based application check.

OEM numbers

54500-JG00B | 54501-JG00B

Supersession

The current side-specific service records document earlier JG000/JG00A references. A right-side predecessor stays on the right through its service chain; the left branch does not become a substitute because the dimensions look similar. Independent Nissan descriptions include equipment notes, including wheel-package wording, so do not assume every broad year table resolves an individual vehicle. Confirm the actual original arm and current service number. The redesigned 2014-up Rogue, Rogue Sport and Hybrid are outside the page even when a retailer groups later models under a shared name.

Fitment

A Rogue lower-arm order needs the full number, not just the shared JG00B suffix. In the scoped US 2008–2013 first-generation 2.5L CVT crossover, 54500-JG00B identifies the front right/passenger-side lower arm and 54501-JG00B the front left/driver-side arm. The original diagram calls these transverse links. That terminology should not send a buyer toward a rear lateral link or upper arm from the same search result. FWD/AWD, build and installed equipment still belong in the VIN-based application check.

Aftermarket options

Complete arm, ball joint, bushing and attaching bolt are different purchase units. Read the exact seller’s contents and check whether the joint and bushings are supplied rather than treating an illustration as a packing list. One listed arm is not a pair. An aftermarket kit must have manufacturer support for the correct side and equipment branch; a generic front suspension package is not enough. Decide with an inspection whether the repair calls for a complete assembly or a supported individual-component repair, including any additional labor and alignment requirements.

Before you buy

Suspension looseness, collision damage or modified geometry requires a qualified assessment; a part-number match cannot certify the rest of the vehicle as safe. Follow the correct fastener and bushing-loading procedure and inspect the result before returning the car to service. No generic torque, reused-hardware promise or performance-upgrade claim is made here. Keep the VIN-confirmed side and supplied SKU on the invoice and reject incomplete or opposite-side shipments before installation. Both exact destinations passed the dated purchase check, but later unavailability must not trigger a rear-link or unverified wheel-package substitution.

Research and fitment sources