Browse system: Steering & suspension

Mazda CX-5 · Buyer's guide

Mazda CX-5 2013–2015 front lower control arms: left/right and the 2016 change

US 2013–2015 Mazda CX-5 / 2014–2015 Mazda CX-5; exact engine, transmission, drivetrain, position and package boundaries in guide

Current seller options

WHERE TO BUY

Open an exact listing, then confirm fitment, stock, price, and shipping with the seller before ordering.

Seller links checked . Prices and availability can change.

What you need to know

For the original US 2013–2015 CX-5 gasoline front suspension, KD35-34-350T is the reviewed driver-side/left lower control arm and KD35-34-300T is the passenger-side/right arm. Side is defined from the seated driver facing forward, not from looking at the vehicle from the bumper. Confirm which front corner needs repair before comparing kits. This guide does not include the 2016 KA0G arm family: the model may still look similar, but that is not permission to ignore the service-number change.

OEM numbers

KD35-34-350T | KD35-34-300T

Supersession

The original diagram's right KD35-34-300P and left KD35-34-350S resolve to their respective T-suffix current products. The checked replacement histories retain separate right and left chains; they do not converge into a single arm for both sides. Other suffixes in those histories are earlier service identities, not a general invitation to interchange left and right. Keep the complete current number, side and VIN application together on the order. Do not apply a Mazda6, later CX-5 or global diesel table to this US original gasoline suspension without independent evidence.

Fitment

For the original US 2013–2015 CX-5 gasoline front suspension, KD35-34-350T is the reviewed driver-side/left lower control arm and KD35-34-300T is the passenger-side/right arm. Side is defined from the seated driver facing forward, not from looking at the vehicle from the bumper. Confirm which front corner needs repair before comparing kits. This guide does not include the 2016 KA0G arm family: the model may still look similar, but that is not permission to ignore the service-number change.

Aftermarket options

Compare an arm assembly with an individual front bushing, a stabilizer link or a larger suspension kit on the work actually needed. The OEM drawing places those components nearby but does not establish that each is supplied with the selected arm. Confirm ball-joint, bushing and hardware contents on the exact seller's offer rather than inferring them from an illustration. If a repair kit combines both sides or extra links, every included component still needs the correct year and position. A lower price for one bushing is not a like-for-like assembly comparison.

Before you buy

Have the suspension inspected for arm damage, bushing wear and joint play before deciding on replacement. An alignment problem, tire wear or clunk can have more than one cause. Use proper support, the relevant tightening procedure and an alignment check as required after repair; no generic torque or bushing preload instructions are supplied here. The two new current OEM pages had order paths on the check date, not guaranteed inventory. Modified suspension or unidentified prior repairs require confirmation of the installed parts. Never buy the opposite side simply because its current page is easier to find.

Research and fitment sources