Browse system: Steering & suspension

Kia Sedona · Buyer's guide

2015–2020 Kia Sedona front lower arms: driver and passenger assemblies

US 2015-2020 Kia Sedona; exact engine, transmission, drivetrain, position and package boundaries in guide

Current seller options

WHERE TO BUY

Open an exact listing, then confirm fitment, stock, price, and shipping with the seller before ordering.

Seller links checked . Prices and availability can change.

What you need to know

A front lower control-arm purchase for a US 2015–2020 Kia Sedona needs a side-specific order. The reviewed assembly 54500A9100 is left/driver side; 54501A9100 is right/passenger side. This guide covers the 3.3L GDI front-wheel-drive minivan, including its six-speed and later eight-speed automatic years. Confirm the VIN, front axle location and old arm before selecting a card. Do not transfer a left/right numbering convention from Nissan or another make: similar-looking service numbers can use different side conventions.

OEM numbers

54500A9100 | 54501A9100

Supersession

The original front-suspension crossmember diagram places these complete lower arms separately from bushings, joints and rear suspension links. The 55210/55220 families found in a broad control-arm search are not the front lower-arm pair, and a rear upper arm is not a substitute either. The reviewed product identities do not establish that every suffix from another Kia application supersedes this pair. Match the full number and side, and verify any later replacement chain against the VIN rather than using a broad list of Sedona trims as a universal interchange statement.

Fitment

A front lower control-arm purchase for a US 2015–2020 Kia Sedona needs a side-specific order. The reviewed assembly 54500A9100 is left/driver side; 54501A9100 is right/passenger side. This guide covers the 3.3L GDI front-wheel-drive minivan, including its six-speed and later eight-speed automatic years. Confirm the VIN, front axle location and old arm before selecting a card. Do not transfer a left/right numbering convention from Nissan or another make: similar-looking service numbers can use different side conventions.

Aftermarket options

Decide whether the repair calls for a complete arm or an individually identified joint or bushing. Compare the exact assembly contents, labor and condition of the remaining components before choosing a cheaper component-only order. Do not assume that every complete-arm offer includes identical hardware or that a two-item photograph means a pair is being sold. Inspect mounting points and nearby suspension parts when the arm is bent or the vehicle has collision damage. A clunk, pull or uneven tire wear is not enough by itself to diagnose the arm, so establish the fault before committing to the purchase.

Before you buy

Both selected exact destinations were purchase-capable when reviewed, with matching identities and clear side labels. They are separate conditional orders, not an instruction to replace both sides. Confirm quantity, included components, current stock and the final VIN application at checkout. Suspension work and alignment should follow the vehicle-specific procedure; this page supplies no guessed torque or tightening-position instructions. Non-US diesel variants, older Sedona generations and later Carnival models are excluded. If a retailer stops carrying an arm, keep the front/lower/side distinctions when evaluating another exact product. A rear link or generic repair kit should never be displayed as the replacement merely because it remains available.

Research and fitment sources