Browse system: Electrical & ignition

Hyundai Tucson · Buyer's guide

2011–2015 Hyundai Tucson Starters: 2G200 vs the 11- and 13-Tooth Nu Units

US 2011-2015 Hyundai Tucson; exact engine, transmission, drivetrain, position and package boundaries in guide

Current seller options

WHERE TO BUY

Open an exact listing, then confirm fitment, stock, price, and shipping with the seller before ordering.

Seller links checked . Prices and availability can change.

What you need to know

The Tucson starter decision is not simply 2.0L versus 2.4L. For the reviewed early MPI family, the documented 36100-2G000 service path leads to current 36100-2G200; the later 2.4L GDI automatic diagram also identifies 2G200. The later 2.0L Nu diagram instead lists 36100-2E120 with 11 teeth and 36100-2E121 with 13 teeth. Match the VIN-supported starter application and original pinion configuration before paying. The shared Tucson name or a seller table spanning both engines does not make those pinions interchangeable.

OEM numbers

36100-2G200 | 36100-2E120 | 36100-2E121

Supersession

An independent dealer describes the 2E121 Tucson application from May 12, 2014, while original diagram repair-component date ranges overlap. Do not turn that information into a universal model-year cutoff or assume every 2014 Tucson takes the same starter. Build date is a useful identification input, but the complete assembly and VIN application must settle an overlapping case. The US 2014–2015 lineup uses six-speed automatics, despite overseas manual configurations in the diagram. No claim is made that 2E121 universally supersedes every 2E120 installation.

Fitment

The Tucson starter decision is not simply 2.0L versus 2.4L. For the reviewed early MPI family, the documented 36100-2G000 service path leads to current 36100-2G200; the later 2.4L GDI automatic diagram also identifies 2G200. The later 2.0L Nu diagram instead lists 36100-2E120 with 11 teeth and 36100-2E121 with 13 teeth. Match the VIN-supported starter application and original pinion configuration before paying. The shared Tucson name or a seller table spanning both engines does not make those pinions interchangeable.

Aftermarket options

The product being compared is a complete starter, not a magnetic switch, armature, drive, bracket or pinion repair set. A repair kit needs a supported application to the actual starter manufacturer and version; being displayed near both assemblies is insufficient. Check supplied condition and any core requirements independently. For an aftermarket candidate, require the maker to identify the correct engine, original number and pinion branch. A low-priced unit described only as fitting a range of Hyundai/Kia models is not enough evidence, even when its mounting photograph appears close.

Before you buy

Have the starting circuit, battery supply and grounds checked before ordering. A click, intermittent no-crank or slow crank can arise outside the starter itself. Use the model-specific service procedure for isolation, access and installation rather than generic torque advice. Keep the original label and unit until the delivered assembly has been matched. A previously modified powertrain requires identification beyond this factory-configuration guide. These exact pages were orderable when checked, but future availability can change. If one Nu branch disappears, neither the other tooth count nor a 2G200 product may be promoted as a substitute just to keep a purchase option visible.

Research and fitment sources