Browse system: Cooling
2010–2012 Fusion/Milan Water Pumps: 2.5L vs 3.0L, Not Sport
US 2010-2012 Ford Fusion/Mercury Milan; exact engine, transmission, drivetrain, position and package boundaries in guide
WHERE TO BUY
Open an exact listing, then confirm fitment, stock, price, and shipping with the seller before ordering.
Seller links checked . Prices and availability can change.
This purchase guide covers conventional US 2010–2012 Ford Fusion and 2010–2011 Mercury Milan sedans with the 2.5L four-cylinder or 3.0L V6. The four-cylinder service reference is 4S4Z-8501-E; the 3.0L engine-pump reference is 9L8Z-8501-A. They are separate engine branches, not interchangeable cooling upgrades. The 2.5L vehicle may be manual or automatic and is FWD; the 3.0L is automatic with FWD or factory AWD. Verify the exact VIN and original assembly. Ford Fusion Sport 3.5L and Hybrid cooling pumps are deliberately excluded because their system roles and replacement requirements need separate evidence. No 3.5L Mercury Milan is implied by broad merchant tables.
OEM numbers
4S4Z-8501-E | 9L8Z-8501-ASupersession
Earlier four-cylinder references including 4S4Z-8501-AA lead to 4S4Z-8501-E. The V6's 9L8Z-8501-A is its own application and should not be merged with a similarly numbered housing or electric auxiliary pump. A shared 8501 base number identifies a broad part family, not the same physical assembly. The source catalogs also contain 3.5L sprocket-related entries; these must not be interpreted as options for a 2.5L or 3.0L repair.
Fitment
This purchase guide covers conventional US 2010–2012 Ford Fusion and 2010–2011 Mercury Milan sedans with the 2.5L four-cylinder or 3.0L V6. The four-cylinder service reference is 4S4Z-8501-E; the 3.0L engine-pump reference is 9L8Z-8501-A. They are separate engine branches, not interchangeable cooling upgrades. The 2.5L vehicle may be manual or automatic and is FWD; the 3.0L is automatic with FWD or factory AWD. Verify the exact VIN and original assembly. Ford Fusion Sport 3.5L and Hybrid cooling pumps are deliberately excluded because their system roles and replacement requirements need separate evidence. No 3.5L Mercury Milan is implied by broad merchant tables.
Aftermarket options
Before buying a pump, locate the leak and establish whether it comes from the pump, housing, hose, thermostat area, or another joint. Ask the shop to state which seals, housing components, drive parts, and fluids are included in the repair estimate. A low-priced bare pump can leave the job incomplete if a separate damaged housing is required. Compare mounting faces, port arrangement, drive connection, and the exact application against the removed part. If using aftermarket, rely on the pump manufacturer's engine-specific application rather than a seller's broad Fusion/Milan title. Do not add an unrelated electric cooling pump to the order merely because it appears in the same diagram. The buying objective is the correct diagnosed component and complete necessary repair, not the largest bundle.
Before you buy
Let the engine cool before any cooling-system inspection and do not drive an overheating car. Filling, bleeding, seal replacement, and fastener procedures must follow the exact vehicle's service information. Seller availability was checked only on the stated review date and may change. This guide retains its engine-identification value even when a product becomes unavailable; an unsupported substitute will not be shown as a listing.
Research and fitment sources
Supersede reviewed 8 unique research sources for this guide. 2 also appear above as a seller or official action and are not repeated here; 6 additional citations follow.
Research last verified .
