Browse system: Steering & suspension

Ford Transit · Buyer's guide

Ford Transit 2015–2019 front lower arms: right CK4Z-3078-A versus left CK4Z-3079-A

US 2015–2019 Ford Transit; exact engine, transmission, drivetrain, position and package boundaries in guide

Current seller options

WHERE TO BUY

Open an exact listing, then confirm fitment, stock, price, and shipping with the seller before ordering.

Seller links checked . Prices and availability can change.

What you need to know

This guide covers original US 2015–2019 full-size Transit 3.7L gasoline cargo vans with rear-wheel drive, six-speed automatic and the original single-rear-wheel chassis. The reviewed lower arms are CK4Z-3078-A on the right/passenger side and CK4Z-3079-A on the left/driver side. They are individual conditional choices, not a pair or interchangeable sides. Transit Connect, later AWD vans, altered front axles and unverified heavy-duty or dual-rear-wheel configurations are excluded. Confirm the van's original suspension and chassis application before ordering by engine or model badge alone.

OEM numbers

CK4Z-3078-A | CK4Z-3079-A

Supersession

The current right arm follows BK3Z-3078-A/C references; the left arm follows the corresponding BK3Z-3079 family. Independent Ford information identifies right versus left, the original non-4WD application and included bushings. It also flags related front and rear bolts as non-reusable components. Preserve those distinctions when comparing a complete arm with a separately pressed bushing repair. A shared diagram, common prefix or similar casting does not let the right assembly replace the left. Later LK-series AWD and other revised suspension parts are not automatic upgrades for the original chassis.

Fitment

This guide covers original US 2015–2019 full-size Transit 3.7L gasoline cargo vans with rear-wheel drive, six-speed automatic and the original single-rear-wheel chassis. The reviewed lower arms are CK4Z-3078-A on the right/passenger side and CK4Z-3079-A on the left/driver side. They are individual conditional choices, not a pair or interchangeable sides. Transit Connect, later AWD vans, altered front axles and unverified heavy-duty or dual-rear-wheel configurations are excluded. Confirm the van's original suspension and chassis application before ordering by engine or model badge alone.

Aftermarket options

Check delivered contents rather than assuming a complete arm includes every joint or fastener visible in the drawing. Verify bushings, any joint inclusion, one-use bolts and the exact repair procedure before comparing total repair cost. An aftermarket arm should document equivalence to the correct side-specific current branch and original van configuration. A generic universal control arm or an upper/rear suspension link is not an alternative. Converted campers, mobility vans and collision-repaired vehicles may carry non-original hardware, so compare the installed assembly with the factory identification instead of choosing from a photograph alone.

Before you buy

Clunks, tire wear and steering complaints should be inspected to distinguish arm damage, bushings, joints, wheel bearings and alignment causes. Installation requires safe support, correct new fasteners where specified, and the required final alignment/inspection. No generic torque or altered-ride-height clearance promise is supplied here. Both exact new destinations were purchase-capable when reviewed; that does not reserve inventory. If chassis or installed-side identification remains uncertain, resolve it before purchase. A correctly sided assembly with a complete hardware plan is more useful than a low-priced arm that cannot safely finish the repair.

Research and fitment sources