Browse system: Steering & suspension
2007 Monte Carlo 3.5 lower arms: right 22947663 and left 22947664
US 2007 Chevrolet Monte Carlo; original-number, engine, gearbox, drivetrain, trim, axle, side and equipment gates in guide
WHERE TO BUY
Open an exact listing, then confirm fitment, stock, price, and shipping with the seller before ordering.
Seller links checked . Prices and availability can change.
This comparison is for the US 2007 Chevrolet Monte Carlo coupe with the factory3.5L V6, automatic transaxle and front-wheel drive, including the gasoline and FlexFuel engine variants identified in the owner manual. Select the front lower arm and the actual damaged side, not a similarly named rear trailing arm. SS/V8 or altered suspension applications require separate confirmation and are not assumed to share the selected fitment. A control-arm search can mix several positions, so preserve the physical position and original service identity throughout the order.
OEM numbers
22947663 | 22947664Supersession
22947663 is the reviewed passenger/right front lower assembly, and 22947664 is its driver/left counterpart. They are not interchangeable upgrades. The right service history includes25853334/20977506; the left family includes25853335/20977507. Those chains help identify older labels only after the side and application are established. Manufacturer naming corroborates the right-hand position, while the exact OEM product/application pages provide the current identities.15820927 and 25990164 are rear trailing-arm results researched in the same category, not alternate front lower arms or evidence of an all-position fit.
Fitment
This comparison is for the US 2007 Chevrolet Monte Carlo coupe with the factory3.5L V6, automatic transaxle and front-wheel drive, including the gasoline and FlexFuel engine variants identified in the owner manual. Select the front lower arm and the actual damaged side, not a similarly named rear trailing arm. SS/V8 or altered suspension applications require separate confirmation and are not assumed to share the selected fitment. A control-arm search can mix several positions, so preserve the physical position and original service identity throughout the order.
Aftermarket options
A complete arm can be a different buying decision from replacing an individual ball joint or bushing. Compare the inspection finding with the actual supplied assembly, joint, bushings and warranty; do not replace a sound arm solely because the category includes it. The independent right-arm description includes bushings and a lower joint, but that does not mean every offer includes pivot bolts or every illustrated service piece. Establish box contents and service-required fasteners before comparing total cost. The two exact new side-specific products are kept distinct, without transferring pictures, prices or contents between them.
Before you buy
Front suspension work needs safe load management, correct tightening at the specified position and the required alignment/geometry checks. Use the factory procedure rather than an assumed torque from a merchant page. Inspect the mounting structure and delivered part before installation; a collision-damaged cradle is not repaired by choosing a matching arm number. Limited verified supplier depth: both exact products passed one retailer’s dated stock/cart check. If the side, suspension configuration or original number cannot be reconciled, pause the purchase instead of accepting a rear-arm result or a broad2000–2007 model heading as sufficient proof.
Research and fitment sources
Supersede reviewed 7 unique research sources for this guide. 2 also appear above as a seller or official action and are not repeated here; 5 additional citations follow.
Research last verified .
