OEM numbers
LH and RH front axle assemblies are position-specific | verify inner-joint style, length, spline counts, seal surface and axle-nut contentsSupersession
No left-to-right interchange is asserted. A shared outer spline does not prove correct length, inner joint, seal surface or drivetrain application.
Fitment
Identify physical side and drivetrain, then compare the removed shaft's compressed length, inner joint style, inboard/outboard splines, seal diameter, tone/encoder features and bracket or damper. Replace disturbed hardware as specified.
Aftermarket options
New axle assemblies can qualify with exact side/drivetrain dimensions and warranty terms. Rebuilt and new products should not be treated as identical without joint and boot evidence.
Before you buy
Only two exact seller paths could be verified. Match physical side, drivetrain, inner joint, length, spline counts, seal surface and included hardware.
Research and fitment sources
Supersede reviewed 8 unique research sources for this guide. 2 also appear above as a seller or official action and are not repeated here; 6 additional citations follow.
Research last verified .
